 |
Instant Codes/Frequencies Learning Transmitter - 2 Buttons |
|
 |
 |
Key Specifications / Special Features
- No frequency counter is needed. Do it yourself
- Fast Code / Frequency Learning are proceeded at the same time
- Patent Right Registered fast learning, approx. 3 seconds per duplication
- Frequency Range : 250MHZ -- 450MHZ
- 4 channels available ( 4 different code with 4 different frequency )
- Special Memory Circuit Design
- Universal type design -Compatibility 95 % to all world wide transmitter.
- Reliable SMT components produced.
- Elegant Light shape with Big button Design
- weight : 25.5 gram
- Size : Length 52.5mm x width 28.5mm x thickness 11.5mm
- Outer case color : Black / various colors coating are available to make on request.
|
|
 |
OPERATION INSTRUCTION |
- [1]. Transmission :
- Pressing any one channel button, LED lights on solid.
- [2]. To activate Codes / Frequencies Learning Mode
- Press and hold buttons 1+2 together, count LED flashing
- LED Flashes once then release - Transmission mode
- LED Flashes twice then release - Learning mode
- [3]. To Proceed Code / Frequency Learning --Code Learning mode
- As sketch (1) ; Hold original (Old) transmitter at Left hand side and 301H-2H at Right hand side.
|

|
(a). |
Keep 15cm distance between Old TX (transmitter) and 301H-2H |
(b). |
Pressing button 1. of Old TX and 301H-2H together at the same time |
(c). |
301H-2H flashes twice and goes off |
(d). |
Now slowly move the Old TX to right hand side and stop when 301H-2H's LED is lighting on solid |
(e). |
3 seconds after, LED of 301H-2H goes off, code/frequency learning is complete for button 1 |
(f). |
Button 2 or 3.. please proceed the steps as a). ~ e). |
|
- Remark :
-
[A]. |
If code/frequency learning of 301H-2H is not successful from the above proceeding, please change the position of Old TX as sketch (2) and starting again from steps a)..e). |
[B]. |
Step b.) - If LED of 301H-2H lights ON, 301H-2H is not under Code/Frequency Learning mode, please proceed step [2] again. |
[C]. |
A/B section switch: Turn switch up at A. section - 2 channels are able to learn 2 different codes & frequencies Turn switch down at B section-2 channels are able to learn 2 different codes & frequencies |
[D]. |
It will skip out the "learning Mode" if pressing any buttons over 4 times. Please renew to enter the 'learning mode' and do the procedures again for completing duplication. |
|
|
Hilevel Technology Corp
6F NO.8,LANE 114 Hoping Rd Lu Chou City,TAIPEI HISEN,TAIWAN
TEL:+886-2-82822040 FAX:+886-2-82821373 |
|