For SAW (433.92Mhz)

Key Specifications/Special Features:

• Numbers of button : 4
• Numbers of channel : 1
• Frequency range: only 433.92Mhz
• Size : 65 x 39 x 15mm
• Voltage : DC12V GP-23A
• Elegant design

Main Export Markets:

• Main Export Markets: Worldwide

Plastic Box Color:

• Black
• Walnut grain finish
• Green metallic finish

Button's Color:

• Orange
• Blue
• Dark Gray
• Light Gray

Code Learning Transmitter Operation Instruction

With 301H-1A, it is able to learn the codes from a fixed code R.F, transmitter (TX) covering the frequency range between 250MHz and 460MHz. Available for almost R.F. transmitter (TX) selling/used in the markets.

Step 1:

By pressing and holding the buttons of 301H-1A then pressing and holding the buttons of original transmitter, the LED bulb of 301H-01 blinking , solid on and goes off when code well learn from the original TX. The buttons pressing must be button 1 vis-a-vis button 1, button 2 vis-a-vis button 2, ... until all buttons pressed. Note :If the code learning fail (LED bulb keep blinking when pressing the button), change the holding position of both transmitter to "side by side", or "back to back" or any position other than head to head

Remark:

1. To erase the codes out from 301H-1A Press 4 buttons at the same time, LED flashing 3 times and goes Off.
2. Code learning can only be effected when the 301H-1A is BLANK without code contained - LED light flashing
3. Do not operate all the procedures at the desk covered with metal plate.